1) Check for ribs on the back of the door opener. Make sure the nuts will not be on top of a rib.
|
|||||||||
|
|
5) Check the EZ Handle for level before drilling second hole. Level it to the lines of the door handle, not to a bubble (vehicle may not be level). | |||||||
|
1) Check for ribs on the back of the door opener. Make sure the nuts will not be on top of a rib. |
|||||||||
| 2) Align EZ Handle to outer edge of opener | |
|
6) Drill 2nd hole through EZ Handle and door opener. Install 2nd bolt and nut. | ||||||
| 3) Center EZ Handle and check for ribs before drilling. | |
|
7) Level EZ Handle and tighten both bolts. | ||||||
| 4) Drill top hole first. Install bolt and nut and tighten to snug (do not tighten all the way). | |
EZ Handle comes with a copy of these instructions plus the drill bit necessary for installation. The tools required are a drill, a screwdriver and a small wrench. Normal installation time is less than 10 minutes. | |||||||
|
|||||||||
|
|||||||||